측정 단위:
* special requirements. EA
TXT
묘사:
Duct Type Ventilation Heater
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Ventilation duct
MRC:
Indicates the heat medium type for which the unit is designed.ABAM
Heat Medium Type:
Air
MRC:
Indicates the limit of the maximum pressure for which the item is designed.ABAN
Maximum Pressure Limit:
300.0 pounds per square inch gage
MRC:
A measurement from the bottom to the top of the duct,in distinction from depth.ABAT
Duct Height:
14.000 inches
MRC:
A measurement taken at right angles to the length of the duct,in distinction from height.ABAU
Duct Width:
3.188 inches
MRC:
The number of heat outlets included on the item.ABAW
Heat Outlet Quantity:
1
MRC:
The direction in which the heat is discharged from the item.ABAX
Heat Delivery Direction:
Horizontal
MRC:
Indicates the type of outlet(s) provided for the discharge of heat.ABAY
Heat Discharge Outlet Type:
Stationary
MRC:
Indicates the device/s/ provided for the purpose of directing the flow of heat.ABAZ
Heat Directing Device:
Radial diffuser-vertical vanes
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
6.188 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
6.188 inches 6.188 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
5.000 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
5.000 inches 5.000 inches
MRC:
Indicates the type of device which controls the operation of the item.ALYC
Operating Control Type:
Any acceptable
MRC:
Indicates the type of device which controls the operation of the item.ALYC
Operating Control Type:
Any acceptableany acceptable
MRC:
Indicates the type of heating element provided.BDXJ
Heating Element Type:
Hot water coil or steam coil
MRC:
The chemical compound or mechanical mixture properties of which the inclosure is fabricated.CQSJ
Inclosure Material:
Steel
MRC:
The rate of heat delivery of the item.CQXD
Heat Delivery Rate:
Any acceptable
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
21.000 inches
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
