측정 단위:
* special requirements. EA
부품 정보
Grumman aerospace corporation a10 aircraft
TXT
묘사:
Electrical Engine Starter
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.405 inches and 0.406 inches
Mounting Hole Circle Radius:
2.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting flange.ADMD
Mounting Flange Shape Style:
Triangular
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the engaging mechanism.AKCP
Engaging Mechanism Style:
Peripheral outboard gear drive w/worm shaft, barrel and rubber compression cushion w/drive housing
MRC:
The amount of rotation of the opening in the drive housing from the horizontal plane,in a clockwise direction,necessary to enable the starter pinion to engage the flywheel ring gear,expressed in degrees.AKCQ
Engaging Mechanism Opening Angular Deviation In Deg:
250.0
MRC:
The maximum current measured under established stall conditions of the motor,expressed in amperes.AKCS
Lock Test Current Rating In Amps:
110.0
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Counterclockwise
MRC:
The positional relationship of the axis of the engaging mechanism to the axis of the armature.AKCX
Engaging Mechanism To Armature Positional Relationship:
Straight
Mounting Flange Angular Deviation In Deg:
70.0
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
24.0
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
1 threaded stud
