MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.718 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.010 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.025 inches
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
-55.0/+125.0 degrees celsius
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
20.0 volts input and 30.0 volts input
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
28.0 volts output
MRC:
The designation that identifies the schematic diagram of the contact configuration.APFR
Contact Arrangement:
Double pole, double throw
MRC:
The amount of current for which the item is designed.AXNP
Current Rating:
10.00 amperes resistive
MRC:
The amount of current for which the item is designed.AXNP
Current Rating:
2.00 amperes lamp
MRC:
The amount of current for which the item is designed.AXNP
Current Rating:
4.00 amperes motor
MRC:
The amount of current for which the item is designed.AXNP
Current Rating:
8.00 amperes inductive
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Hermetically sealed
MRC:
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.CRXH
Time Delay:
120.00 seconds release
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
14 pin
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-prf-83726/29 government specification
