MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL
Cross Section Outside Diameter:
0.080 inches
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Lug terminal w/mounting hole both ends single conductor
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the lead.AXBQ
Leadlength:
Between 8.000 inches and 8.250 inches
MRC:
The number of strands per conductor.BLNZ
Strand Quantity Per Conductor:
7 single conductor
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Stranded single conductor
MRC:
The designation used to describe the round stranded or round solid conductor size.CXDC
Round Conductor Size:
28 awg single conductor
MRC:
The american wire gage size of the individual strands of wire used in each stranded conductor.CXDG
Strand Awg Size Per Conductor:
36 single conductor
MRC:
Designates the size of the mounting aperture provided in the terminal lug.CXFM
Terminal Lug Aperture Size:
0.323 inches 1st end single conductor
MRC:
Designates the size of the mounting aperture provided in the terminal lug.CXFM
Terminal Lug Aperture Size:
0.323 inches 2nd end single conductor
MRC:
The five-position commercial and government entity code for the manufacturer of the terminal.CXGN
Terminal Commercial And Government Entity Code:
96906 both ends single conductor
MRC:
The pulling force which the item is capable of withstanding without any permanent deformation or damage.CXHH
Lead Pull Strength:
110.0 pounds
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper core conductor single conductor
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
96906-ms25083 standard (includes industry or association standards, individual manufactureer standards, etc.).
