MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b second end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand first end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand second end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.670 inches first end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.312 inches second end
MRC:
Items furnished as accessories which are not specified elsewhere.ABFF
Furnished Items:
Gland nut and gland ring
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.500 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.265 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
2.333 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.125 inches
MRC:
A measurement from the top to the bottom of the bevel on the first end.ADGP
First End Chamfer Depth:
0.219 inches
MRC:
A measurement from the top to the bottom of the bevel on the second end.ADGS
Second End Chamfer Depth:
0.219 inches
First Packing Chamber Inside Diameter:
1.250 inches
Second Packing Chamber Inside Diameter:
1.704 inches
First Packing Chamber Length:
1.375 inches
Second Packing Chamber Length:
1.719 inches
MRC:
The number of packing chambers contained in the item.ADJG
Packing Chamber Quantity:
1
MRC:
The means of attaching the item.AXGY
Mounting Method:
Welded
MRC:
Designates the size of the item.BGBD
Size:
1.265 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 first end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.250 inches first end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.812 inches second end
First End Chamfer Angle:
0.0 degrees
Second End Chamfer Angle:
45.0 degrees
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
L
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain-double
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-s-24235 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Npt first end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un second end
