MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand both ends
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.625 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
11.875 inches
MRC:
The maximum measurement of the smallest dimension of the accommodated item,in distinction from length or width.ABWK
Item Accommodated Maximum Thickness:
0.500 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 2.307 inches and 2.317 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
3.938 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.875 inches
MRC:
A measurement from the top to the bottom of the bevel on the first end.ADGP
First End Chamfer Depth:
0.358 inches
MRC:
A measurement from the top to the bottom of the bevel on the second end.ADGS
Second End Chamfer Depth:
0.358 inches
First Packing Chamber Inside Diameter:
Between 3.012 inches and 3.022 inches
Second Packing Chamber Inside Diameter:
Between 3.012 inches and 3.022 inches
First Packing Chamber Length:
5.142 inches
Second Packing Chamber Length:
5.142 inches
MRC:
The number of packing chambers contained in the item.ADJG
Packing Chamber Quantity:
2
MRC:
The means of attaching the item.AXGY
Mounting Method:
Welded
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 both ends
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
3.125 inches both ends
First End Chamfer Angle:
45.0 degrees
Second End Chamfer Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-20166, gr ht military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain-double
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un both ends
MRC:
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.ZZZX
Departure From Cited Designator:
Asmodified by material
