부품 정보
Grommet, cushion, composite, edging
TXT
묘사:
Nonmetallic Grommet
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
46.0 shore durometer a
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
Between 0.240 inches and 0.260 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.36 inches and 0.40 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.23 inches and 0.27 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
1430-01-448-9833
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the grommet.AGME
Grommet Style:
Edging
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Stainless steel has a thermosetting epoxy finish that is lime green color number 14553 per fed-std-595. Elastomer cushion flammability rating per mil-std-202, method 111a.
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Green metallic parts
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Gray grommet
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel metallic parts
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber grommet
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5518 assn standard single material response or ams5904 assn standard single material response or ams5911 assn standard single material response metallic parts
