부품 정보
Grommet, cushion composite, edging
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
0.20 inches
MRC:
A measurement of the longest dimension of a flange,in distinction from width.AFQN
Flange Length:
0.25 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.20 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the barrel.AGLU
Barrel Style:
Funnel flange straight type
Barrel Outside Diameter:
0.20 inches
Barrelheight:
0.25 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Flange
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Elastomer cushion has nonmetallic hardness rating of shore a, 46 durometer; grommet is cut to length at 30 castles
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Green grommet
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Gray bottom
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 301 or steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 grommet
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5517, ams5903 or ams5907 national std/spec single material response grommet
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel grommet
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Fed-std-595, color number 14533, lime green federal standard single treatment response grommet
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
80205-nas-22529/2 professional/industrial association standard