MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Electrically shielded, partial insulator, gasket seat
MRC:
The opposition to the flow of direct current offered by an item,expressed in ohms.AFYV
Dc Resistance Rating In Ohms:
10000.0
MRC:
A measurement of the longest dimension of the reach,in distinction from width.AHPM
Reach Length:
0.437 inches
MRC:
Indicates the designed use of the item.ALBY
Usage Design:
Engine other than aircraft
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the electrode.AYGA
Electrode Style:
B1 single flat shell ground electrode (see also style 4)
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the electrode.AYGA
Electrode Style:
Single flat shell ground electrode (see also style 4)
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale,and the location.AYGB
Thread Size And Series/type Designator And Location:
5/8-24 unef shielding err-100
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale,and the location.AYGB
Thread Size And Series/type Designator And Location:
18-1.5mm base err-100
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale,and the location.AYGB
Thread Size And Series/type Designator And Location:
5/8-24 unef shielding
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale,and the location.AYGB
Thread Size And Series/type Designator And Location:
18-1.5mm base
MRC:
The average effective pressure rating for which the item is designed.AYGF
Mean Effective Pressure Rating:
150.0 pounds per square inch
Seat Major Diameter:
0.875 inches
Height Above Mounting Surface:
Any acceptable
Top To Terminal Contact Distance:
3.672 inches
Top To Shield Thread Distance:
Any acceptable
Shield Thread Length:
0.375 inches
Barrel Inside Diameter:
0.468 inches
Terminal Sleeve Inside Diameter:
0.380 inches
