부품 번호 M10215-1F913

Flexible Shaft Assembly

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 66.2 and 89.37 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
m10215-1f913
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
011513477
NSN
국가 주식 번호:
6680-01-151-3477 6680011513477
TXT
묘사:
Flexible Shaft Assembly
INC
INC
아이템 이름 코드:
20315
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b first end
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b second end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand first end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand second end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.484 inches first end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.375 inches second end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 100.973 inches and 101.277 inches
MRC:
The length of a straight line which passes through the center of the wrenching facility,and terminates at the outside circumference.ADMS
Wrenching Facility Outside Diameter:
1.000 inches first end
MRC:
The length of a straight line which passes through the center of the wrenching facility,and terminates at the outside circumference.ADMS
Wrenching Facility Outside Diameter:
0.750 inches second end
MRC:
A measurement of the longest dimension of the tip,in distinction from width.AEDN
Tip Length:
0.770 inches first end
MRC:
A measurement of the longest dimension of the tip,in distinction from width.AEDN
Tip Length:
0.972 inches second end
MRC:
The element,compound,or mixture of which the core is fabricated.AJXJ
Core Material:
Any acceptable
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf second end
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Uns first end
MRC:
The length of a straight line which passes through the center of the core,and terminates at the circumference.AKMH
Core Diameter:
Between 0.128 inches and 0.152 inches
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal first end
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal second end
MRC:
Indicates the type of end.APTD
End Type:
Round keyed second end
MRC:
Indicates the type of end.APTD
End Type:
Square male first end
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.750 inches second end
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.000 inches first end
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Threaded internal first end
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Threaded internal second end
MRC:
The element,compound,or mixture of which the casing is fabricated,excluding any surface treatment.BJPS
Casing Material:
Plastic
MRC:
Indicates the type of facility utilized to assemble or disassemble the item.BPPL
Wrenching Facility Type:
Hexagon first end
MRC:
Indicates the type of facility utilized to assemble or disassemble the item.BPPL
Wrenching Facility Type:
Hexagon second end
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.101 inches across flats and 0.104 inches across flats first end
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.150 inches diameter and 0.153 inches diameter second end
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the casing surface.CFRN
Casing Surface Treatment:
Any acceptable
MRC:
A measurement of the longest dimension of the casing between ferrules,in distinction from width.CFRP
Casing Length Between Ferrules:
100.000 inches
MRC:
The length of a straight line which passes through the center of the casing,and terminates at the outside circumference.CFRQ
Casing Outside Diameter:
Between 0.300 inches and 0.500 inches
MRC:
Indicates the type of protective device included with the casing.CFRR
Casing Protective Device Type:
Plastic cover
MRC:
An indication of whether or not a swivel end(s) is provided.CFRT
Swivel End:
Not provided first end
MRC:
An indication of whether or not a swivel end(s) is provided.CFRT
Swivel End:
Not provided second end
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of the end of the item.CFRW
Enddiameter:
0.750 inches second end
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of the end of the item.CFRW
Enddiameter:
1.000 inches first end
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided first end
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided second end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the core.CFRZ
Corelength:
101.156 inches
MRC:
The direction in which the core is designed to rotate,when viewed axially,from the drive end.CFSB
Core Rotation Direction:
Clockwise
MRC:
An indication of whether or not the core(s) is removable.CFSL
Core Removability:
Removable
MRC:
The radius of the smallest operating circle for which the item is designed.CGDN
Minimum Operating Radius:
5.000 inches

{lang[cimilar]} Flexible Shaft Assemblies

« Liquid and Gas Flow, Liquid Level and Mechanical Motion Measuring Instruments {lang[catalog]}
지금 비교»
맑다 | 숨기다