TXT
묘사:
Face Spanner Wrench Socket
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 2.513 inches and 2.514 inches
MRC:
The length of a straight line which passes through the center of an opening,and terminates at the circumference.AGNJ
Opening Diameter:
Between 2.188 inches and 2.189 inches
MRC:
A measurement taken at right angles to the length of the lug,in distinction from thickness.AHMM
Lug Width:
Between 0.241 inches and 0.243 inches
Lug Length:
Between 0.070 inches and 0.080 inches
MRC:
A numeric value which indicates the size of the drive surface.ATNC
Drive Surface Size:
0.759 inches single end and 0.764 inches single end
MRC:
The physical configuration of the drive end.CTCT
Drive End Shape:
Square single end internal
Angle Between Lugs:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 and steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/8, t6 federal specification 1st material response and qq-t-570, class l6 federal specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Lug
