부품 정보
0.94" of the width of plate is inclined on an angle (-5 degrees); wsd is m-1 abrams tank
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.880 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 0.060 inches and 0.120 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 16.340 inches and 16.400 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.250 inches all holes and 0.310 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
13
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Unthreaded
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5420-01-430-5403
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
5 holes along outside edge of flat section of width; 1 hole at the corner of cut-away section; 7 holes centered along the angled section of width
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The physical configuration of the item.SHPE
Shape:
Special
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 2 military specification single treatment response
