TXT
묘사:
Nonmetallic Special Shaped Secti
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Bumper strip
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
11000 pounds per square inch
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.138 inches and 0.152 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.630 inches and 1.730 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
84.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Abrasion resistant and hydrocarbon and corrosion resistant and crack and fire retardant and fluid resistant and fuel resistant and grease resistant and oil resistant and wear resistant and weather resistant
First Tip Radius:
Between 0.020 inches and 0.030 inches
First/top Flange Thickness:
Between 0.138 inches and 0.152 inches
First/top Flange Width:
Between 1.630 inches and 1.730 inches
Right Side Offset To End Distance:
Between 0.865 inches and 0.955 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyhexamethylene adipamide
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Polyhexamethylene adipamide, natural, with or without fillers composition
