부품 정보
Material: rubber, stm23-403, shore 55, lockheed aircraft corp
TXT
묘사:
Nonmetallic Special Shaped Secti
MRC:
The element,compound,or mixture of which the jacket is fabricated.AARR
Unable To Decode:
Unable to decode and unable to decode
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Unable To Decode:
Unable to decode and unable to decode
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
50.0 shore durometer a and 60.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
850 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-85.0 degrees fahrenheit and 400.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.937 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
96.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Fuel, aromatic and oil resistant and low temperature and high temperature
Inside Radius:
0.537 inches
Base Flange Thickness:
0.126 inches
MRC:
A measurement taken at right angles to the length of a base flange,in distinction from thickness.AJGQ
Base Flange Width:
0.625 inches
MRC:
A measurement of a straight line drawn from the center of a circle to any part of its circumference.AJGW
Outside Radius:
0.600 inches
First Slot/groove Width:
0.188 inches
First Fillet Radius:
0.031 inches
Second Fillet Radius:
0.031 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.CTGJ
Cross Sectional Shape:
C319
