TXT
묘사:
Nonmetallic Special Shaped Secti
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Unable To Decode:
Unable to decode and unable to decode
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
45.0 shore durometer a and 55.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1000 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 300.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.610 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.750 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
60.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Tear and low temperature and high temperature
Inside Radius:
0.400 inches
Base Flange Thickness:
0.080 inches
MRC:
A measurement taken at right angles to the length of a base flange,in distinction from thickness.AJGQ
Base Flange Width:
0.595 inches
MRC:
A measurement of a straight line drawn from the center of a circle to any part of its circumference.AJGW
Outside Radius:
0.450 inches
First Slot/groove Width:
0.245 inches
First Fillet Radius:
0.020 inches
Second Fillet Radius:
0.020 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.CTGJ
Cross Sectional Shape:
C319
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Color: gray, material: rubber, stm23-402, class 1, grade 50, lockheed aircraft corp
