MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.875 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
7.875 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.000 inches
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 50.0 hertz and 60.0 hertz
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+5.000/+999.999 hertz and +0.001/+500.000 kilohertz
MRC:
The number of parts supplied with the item which may be required for application.AFHS
Accessory Component Quantity:
1
MRC:
The total opposition (resistive and reactive) presented by the item to an alternating current load.AMNE
Output Impedance Rating:
600.0 ohms
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
Between 100.0 volts and 240.0 volts
MRC:
The number of specified ranges of frequencies or wavelengths operating between two stated limits.ANLC
Frequency Band Quantity:
5
MRC:
The name of the accessory component assigned by the controlling agency.AZCG
Accessory Component Name:
Bnc to alligator clip cable
MRC:
The degree of conformity of a measurement to a standard or true value for which the calibration is rated.BDHW
Calibration Accuracy Rating:
Plus 3 pct accuracy rating
MRC:
An indication of the calibrated signal range that is output by the item.BHFZ
Calibrated Signal Output Range:
Sinewave output level 3vrms p10dbv and p 12dbm; square output level 4v with output set for dbv
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Output attenuator provides up to 69.9 db of attenuation in 0.1 db steps, porm 0.1 db continuously variable control provided; vernier action dial, output on/off switch for s/n and crossover measurements; sine wave distortion less than .005 through 20 khz
