부품 정보
There is a hole in the center with a dia. 1.1500 min. And 1.1900 in. Max. 2.67 in. From any sided to center of hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 5.3600 inches and 5.4000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 5.3600 inches and 5.4000 inches
Distance Between Holes Along Length:
4.5020 inches
Distance Between Holes Along Width:
4.5020 inches
Distance From First Hole Centerline To End Along Length:
Between 0.4200 inches and 0.4600 inches
Distance From First Hole Centerline To End Along Width:
Between 0.4200 inches and 0.4600 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.2300 inches and 0.2700 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams-5510 assn standard single material response