측정 단위:
* special requirements. SH
부품 정보
Semi-gloss or polished finish
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Laminated
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
Not rated
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
Not rated
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 35.069 inches and 36.031 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.250 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 95.069 inches and 96.031 inches
MRC:
The ability of the material to transmit light and allow visual perception.ABWN
Material Transparency:
Any acceptable
MRC:
The backing or coating that is applied to the surface for protection of the basic material. it is intended to be stripped off prior to application of the fabricated item,and is not intended to become part of the sealing surface. excludes surface treatments,adhesive coatings,and lubricants.ADYX
Protective Covering Material:
Paper
MRC:
The element,compound,or mixture of which the strengthening feature is fabricated.ADZA
Strengthening Feature Material:
Paper
MRC:
The maximum load which can be applied normally to the plane of the material,per unit of cross-sectional area,that an item can withstand without fracture.ADZB
Flexural Strength:
15000 pounds per square inch and 14000 pounds per square inch
MRC:
An integral feature of the item which strengthens and/or stiffens the basic material.ADZK
Strengthening Feature:
Base
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, phenolic, l-p-513, type pbg
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic phenolic and paper
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
L-p-513, type pbg federal specification 1st material response
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Pbg type
