부품 정보
Max sulfur req in accordance with the clean air quality preservation act. Density, 15 degrees c (kg/m3) 815-855. Water and sediment content maximum 0.02
MRC:
Ability of a fluid to affect friction between, and wear in, surfaces in relamotion under load, as measured by wear scar diameterAKXN
Lubricity At 6 Designator Deg Centigrade:
460.0 micrometers
MRC:
The maximum ash content of the item,expressed in percent by weight.CGDF
Maximum Ash Content Percentage By Weight:
0.02
MRC:
The percentage by weight of the maximum sulphur content of the item.CLFT
Maximum Sulphur Content Percentage By Weight:
0.0030
MRC:
An indication of the minimum cetane classification number of the item.CLGB
Minimum Cetane Classification Number:
45
MRC:
A classification indicating the rated grade of the fuel.CLWH
Fuel Grade Classification:
Diesel, ultra-low sulfur
MRC:
The kinematic units (centistokes/mm 2/s) of the item at a rated temperature.CQLQ
Viscosity At Rated Temp:
1.90 40 degrees celsius and 5.50 40 degrees celsius
MRC:
An indication of the maximum temperature at which a certain distillation point is reached,expressed in percent.CRWZ
Distillation Point Percentage At Maximum Temp:
330 degrees celsius at 90.0 percent
MRC:
A measurement of the maximum carbon residue content,expressed in percent by weight,and the test method.CRXY
Maximum Carbon Residue Content Percentage By Weight And Test Method:
0.1 conradson
MRC:
A measurement of the maximum asphaltene content of the item,expressed in percent by weight.CSPB
Err Default:
Err default
MRC:
An indication of the astm copper corrosion classification in accordance with ip 154,astm d130 at 100 deg celsius.CSTK
Copper Corrosion Classification Number:
1
MRC:
A numeric value of the minimum temperature at which the vapor will ignite,and the test method.CTJC
Minimum Flash Point And Test Method:
45.0 degrees celsius pensky-martens closed cup
MRC:
A classification used to identify the supply form by which the item is delivered.CWAY
Supply Classification:
Bulk
