부품 정보
High temperature evaporation loss tester
TXT
묘사:
Constant Temperature Bath
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
17.000 inches
MRC:
A measurement of the longest dimension of an item,in distinction from width.AAJU
Overall Length:
25.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.AAJV
Overall Width:
16.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 50.0 hertz and 60.0 hertz
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
+200.0 to 600.0 degrees fahrenheit
MRC:
An indication of whether or not an insulated feature is included.AHGR
Insulated Feature:
Included
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Solid state controller 1; thermistor probe 1; flowmeters 2; thermocouples 2; sample cups with cover and eduction tubes 2
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
Between 220.0 volts and 240.0 volts
MRC:
Indicates the type of heating element provided.BDXJ
Heating Element Type:
Electric nonimmersion
MRC:
An indication of whether or not a thermoregulator is included.BNDR
Thermoregulator:
Included
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Performs evaporation loss tests on lubricating greases at temps up to 600deg f. Maintains sample temp within porm0.3deg f, while passing heated air over the sample surface at a controlled flow rate. Flowrate maintained at 2l/min at standard temperature & pressure.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81348-astmd2595 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
