부품 정보
W0.125 in. Dia. 8 holes equally spaced through wrenching flats, located 0.305 in. Porm 0.010 from bearing surface; 1.875 in. Diameter 0.125 in. Plus 0.020 in. W, circumferential groove located 0.305 in. Porm 0.010 in. From bearing surface
TXT
묘사:
Octagon Plain Nut
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Plain, octagon
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
2.000 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Not rated
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Unef
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Casehardened
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
18
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 25.0 rockwell c and 35.0 rockwell c
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.250 inches
MRC:
Indicates the type of bearing surface.CRTM
Bearing Surface Type:
Any acceptable
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
0.125 in. Dia. 8 holes equally spaced through wrenching flats, located 0.305 in. Porm 0.010 from bearing surface; 1.875 in. Diameter 0.125 in. Plus 0.020 in. W, circumferential groove located 0.305 in. Porm 0.010 in. From bearing surface
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8645 or steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8645 or steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification 1st material response or qq-s-633, fs9445 federal specification 2nd material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification 1st material response or qq-s-633, fs9445 federal specification 2nd material response
