MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
100.0 inch-pounds
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.437 inches
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Flange
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
50
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
No. 10 /0.190 in./-32 thd size diameter holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
7/16-20
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Splined, straight external
MRC:
The element,compound,or mixture of which the housing is fabricated.AJLF
Housing Material:
Aluminum alloy
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf or nf
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Inlet and outlet
MRC:
The maximum rated working pressure of an item at a specified temperature range.AXFB
Maximum Working Pressure Rating At Specificationified Tempurature Range:
1500 psi
MRC:
The design of the connection.AXFC
Connection Design:
Threaded
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
Shaft extends 1-3/32 in. From housing
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.58 inches and 1.54 inches
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Constant
MRC:
The spacing in the arrangement of the mounting bolt holes.AZFG
Mounting Bolt Hole Spacing:
Mtg holes spaced 90 degrees on 1 in. Bolt circle
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.AZFH
Housing Surface Treatment:
Anodized
