측정 단위:
* special requirements. EA
TXT
묘사:
Engine Poppet Valve
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.1875 inches and 0.1975 inches
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
45.0
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.0312 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
Between 0.0790 inches and 0.0810 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
Between 0.3300 inches and 0.3380 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.6875 inches and 1.6975 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
45.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the stem.ALYX
Stem Style:
Slotted
MRC:
An indication of whether or not a groove for relief of carbon accumulation is included.ALYZ
Carbon Relief Groove:
Not included
Neck Radius:
0.4375 inches
MRC:
A measurement of the longest dimension of a stem,in distinction from width.ALZD
Stem Length:
5.0312 inches
Stem Diameter:
Between 0.3720 inches and 0.3730 inches
Distance From Slot To Stem End:
Between 0.1063 inches and 0.1093 inches
Slot Radius:
Between 0.0790 inches and 0.0810 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, federal standard 66, aisi/sae 3140
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
36.6 rockwell c stem err-100
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
36.6 rockwell c tip err-100
