MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
Between 56.000 inches and 60.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Heavy duty
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
1 cloris cxa tool post set; 1 telescopic taper attachment cuts taper up to 15 in l at one setting; 1 follow rest 3 in cap.W/br.Jaws; 1 steady rest 7 in cap.W/br.Jaws; 1 o/size steady rest 9 in cap.W/roller jaws; 1 trav-a-dial model 6a lin.Meas.Device grad.To 9001 in and installed or equal; 1 12.500 in.Dia.3 jaw precision univ.Chuck w/2 sets of jaws and hardened and ground scroll for d1-8 in.Spindle nose; 1 12.500 in.Dia.4 jaw ind.Chuck meehanite body and forged steel solid rev.Jaws for d1-8 in.Spindle nose; 1 ea, faceplate for d1-8 in.Spindle nose, 17, 24 in.Dia; 1 chuck guard for fitting on headstock; 1 mult-size dead length collet chuck nosemounted key operated 2.500 in.Cap; 1 set of 16 collets .500thru2.500; 1 micrometer carriage stop singlepos; 1 anti-friction heavy duty tailstock ctr.No.5 morse shank; 1 .750 in.Cap.Drill chuck for tailstock w/no.5 morse shank
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
12.000
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Solid
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
16
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+22.0/+1750.0
MRC:
A measurement of the rated swing of the item.BTTD
Rated Swing:
28.000 inches
MRC:
A measurement of the actual swing over the bed of the item.BTTF
Actual Swing Over Bed:
17.000 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
10.500 inches
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Geared head
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
5 morse
MRC:
Designates the size of the hollow spindle hole.BTYN
Hollow Spindle Hole Size:
3.000 inches
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Quick
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
460.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
