부품 정보
Material per mil-s-21952, grade hy-8-, type b; next higher assembly nsn 3040-01-492-8053; used on nssn class submarine
TXT
묘사:
Worm Wheel Gearshaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.264 inches and 6.304 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
Between 6.264 inches and 6.304 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Gear box, rammer drive
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
52
MRC:
The length of a straight line which passes through the center of a gear,and terminates at the outside circumference.AJWS
Gear Outside Diameter:
Between 1.4040 inches and 1.4050 inches
MRC:
Indicates the type of face provided.ALPN
Face Type:
Concave
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Circular grooved, keyway flat, threaded external and circular grooved, keyway flat
MRC:
The number of teeth per inch of pitch diameter.AQGH
Diametral Pitch:
39.26899
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
0.536 inches
MRC:
Indicates the type of shaft included on the item.CRSJ
Shaft Type:
Shouldered
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Right
MRC:
A nominal measurement of the throat radius across the face of the item.CWNP
Throat Radius:
0.218 inches
MRC:
The number of thread leads on the mating item.CWPL
Mating Thread Lead Quantity:
1
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the helix angle on the item.CWPZ
Helix Angle:
3.0000 degrees
MRC:
The quality designation of an item as determined by industry,association,or manufacturer standards.CWWK
Precision Classification:
Quality number 6
MRC:
The chemical compound or mechanical mixture properties of which the shaft is fabricated.CYEQ
Shaft Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the gear is fabricated.CYER
Gear Material:
Steel
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the largest circumference.CYET
Shaft Largest Diameter:
Between 1.4040 inches and 1.4050 inches
MRC:
Indicates the location of the gear on the shaft.CYEU
Gear Location On Shaft:
Off center between ends of shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the longer of two shaft segments.CYEV
Longer Shaft Segment Length:
Between 4.031 inches and 4.051 inches
MRC:
Designates the size of the shaft end included on the item.CYEW
Shaft End Size:
0.687 inches and 0.7876 inches
