부품 정보
Altitude-sea level to 50000 ft.; operating cycles 25000 min; difference of operating & reset point between poles 0.015max; 2 5/8-24nef 2b hex nuts 0.812 across flats x 0.125 thk; internal tooth lockwasher 0.875 o.D.X0.22 thk; keying washer 7/8 o.D.X 0.040 thk tab 0.110 wd; 2-0.037 diameter holes for wire lockin (one in each hex nut) ; switch resistant to skydrol 500a, jp4 & kerosene; internal wiring no.20 gage
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
3.109 inches
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
1.500 inches
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
1.344 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the actuator.AFUQ
Actuator Style:
Round
Actuator Height:
0.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the actuator adapter.AFVV
Actuator Adapter Style:
Pushbutton
Adapter Bushing Length:
1.000 inches
MRC:
The maximum voltage rating at which the item is designed to operate in an alternating current and/or direct current circuit,expressed in volts.AFXE
Maximum Voltage Rating In Volts:
28.0 dc
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.625 inches
MRC:
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.CRLD
Nonpile-up Contact Arrangement:
4 pole, single throw, normally closed, momentary action single switch unit
MRC:
The amount to which the actuating force must be reduced to permit the switch to become unactuated.CRRM
Switch Release Force:
64.0 ounces
MRC:
The amount of force required to actuate the switch.CSJN
Switch Actuating Force:
144.0 ounces
MRC:
The movement of the switch actuator.CXQQ
Actuator Movement:
Between 0.040 pretravel inches and 0.250 overtravel inches and 0.030 differential inches
MRC:
The amount of current the contacts are rated to make or break at maximum rated voltage,with a specified load.CXQR
Contact Load Current Rating At Maximum Rated Voltage:
2.000 amperes inductive dc and 4.000 amperes resistive dc and 2.400 amperes lamp dc and 4.000 amperes motor dc
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unef