TXT
묘사:
S Electrical Insulation Sleeving
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-55.0 degrees celsius and 100.0 degrees celsius
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Flame resistant and mildew resistant and solvent resistant and water resistant
Main Body Wall Thickness:
0.080 inches as supplied
Main Body Wall Thickness:
0.080 inches after unrestricted recovery
Main Bodylength:
4.950 inches after unrestricted recovery
Main Bodylength:
5.000 inches as supplied
Main Body Small End Inside Diameter:
0.230 inches after unrestricted recovery
Main Body Small End Inside Diameter:
0.400 inches as supplied
Main Body Large End Inside Diameter:
0.620 inches after unrestricted recovery
Main Body Large End Inside Diameter:
0.880 inches as supplied
Distance From Bottom Of Shoulder To Large End Of Main Body:
0.610 inches after unrestricted recovery
Distance From Bottom Of Shoulder To Large End Of Main Body:
0.620 inches as supplied
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
1500 pounds per square inch
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Rubber, neoprene, rt-501, rayclad tubes inc
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber, neoprene, rt-501, rayclad tubes inc
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Boot-straight-long
MRC:
The maximum potential gradient the insulating material can withstand,per unit thickness,without rupture.UKBG
Dielectric Material Voltage Rating Per Unit Thickness:
200.0 volts per military /0.001 inch/
