부품 정보
Shielded to prevent radio interference
TXT
묘사:
Engine Accessory Generator
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.688 inches
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Between 3.247 inches and 3.249 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
Between 0.531 inches and 0.609 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
1.219 inches
Second Step Diameter:
0.750 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.156 inches
Unthreaded Portion Length:
1.343 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting.ADER
Mounting Style:
Flange mtd w/two mtg slots and one mtg hole
Pilot Height:
0.822 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Fungus resistant
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
0.750 inches
Center To Center Distance Between Mounting Slots:
3.625 inches
MRC:
An indication of whether or not an item is capable of operation while submerged.AHZV
Submersibility:
Nonsubmersible
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Counterclockwise
MRC:
The distance from the end of the item to the center of the keyway.ANTX
Distance From End To Keyway Center:
1.428 inches
MRC:
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AWDP
Thread Diameter:
0.500 inches
MRC:
Indicates the type of ground polarity utilized.AXHX
Ground Polarity Type:
Negative
MRC:
The minimum speed the armature can revolve and maintain full current output,expressed in revolutions per minute.BCGD
Armature Minimum Speed In Rpm At Full Current Output:
3000
MRC:
The maximum amount of output current for which the item is rated,expressed in amperes.BCGF
Maximum Output Current Rating In Amps:
40.0
MRC:
The cut-in speed necessary to maintain a minimum current flow,expressed in revolutions per minute.BCGG
Minimum Current Cut-in Speed In Rpm:
2300
MRC:
The means by which the item is grounded.BCGN
Grounding Method:
Internal
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft drive end.BCGS
Shaft Drive End Style:
Straight shaft end, threaded, w/keyway
Distance Between Shaft Center And Bottom Mounting Hole Center:
3.062 inches
Bottom Mounting Hole Diameter:
0.484 inches
Center To Center Distance Between Top Mounting Slot And Bottom Mounting Hole:
5.875 inches
MRC:
The speed the armature can revolve and produce maximum current,expressed in revolutions per minute.BCND
Maximum Rated Armature Speed In Rpm:
6000
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Unf
MRC:
A numeric-alpha designator indicating the pitch-diameter tolerance and the external or internal location of the thread.CFHL
Thread Class:
3a
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
24.0
