부품 번호 GPA-0015

Shouldered Shaft

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 10.8 and 14.58 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
gpa-0015
비무장화:
Yes - DEMIL/MLI
수명:
N/A
측정 단위:
10 EA
NIIN:
004298633

부품 정보
Second end style chamfered 0.031 x 45.0 degrees porm 3.0 deg; finish passivate, type ii per qq-p-35 (collins 580-0025-00), flatted end externally threaded 0.250-28unf-2a, 1.125 full thread 0.125 thd runout, item internally threaded 0.138-32 unc-2b, 0.312 full thd

NSN
국가 주식 번호:
3040-00-429-8633 3040004298633
TXT
묘사:
Shouldered Shaft
INC
INC
아이템 이름 코드:
22914
INC
COM
컴플라이언스:
* ITAR Controlled
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Tongue rounded ends
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Unthreaded cross drilled
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.906 inches
MRC:
None.AMDJ
First End Tongue Thickness:
Between 0.184 inches and 0.186 inches
MRC:
None.AMDK
First End Tongue Width:
0.250 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.3120 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.3125 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1280 inches and 0.1310 inches
MRC:
None.AMGT
Second End Distance From Hole Center To End:
0.156 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Amdl and amfz and amgs
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.313 inches
MRC:
None.CSQZ
First End Step Length:
1.344 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a-582 assn standard single material response

{lang[cimilar]} Shouldered Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
지금 비교»
맑다 | 숨기다