부품 정보
Hub style designator second end 7
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
20 both ends
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
3.3330 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
21
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Involute spline both ends
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
1.2500 inches both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
28.0 rockwell c hub and 34.0 rockwell c hub
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
58.0 rockwell c teeth and 63.0 rockwell c teeth
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.333 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.600 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Spiral
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Right
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the pitch angle on the item.CWQD
Pitch Angle:
46.4000 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.770 inches second end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.720 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.264 inches both ends
MRC:
A nominal measurement taken at right angles to the length of a keyway,in distinction from thickness.CWSN
Keyway Width:
0.200 inches second end
MRC:
A nominal measurement between specified points of the counterbore,in distinction from height.CWTB
Counterbore Depth:
0.098 inches first end
MRC:
The nominal length of a straight line which passes through the center of the counterbore,and terminates at the circumference.CWTG
Counterbore Diameter:
1.442 inches first end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
1.968 inches second end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8620 and steel comp 8720
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8620 and steel comp 8720
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66, aisi/sae 8620, 8720 federal standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Peripheral face, back hub protruding
