부품 정보
Spring, compression
TXT
묘사:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.688 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
A measurement of the smallest dimension of the stock,in distinction from length or width.ACVW
Stock Thickness:
Between 0.099 inches and 0.101 inches
Spring Free Length:
Between 2.064 inches and 2.124 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
9.0
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
30.00 pounds
Spring Solid Length:
1.344 inches
Spring Solid Outside Diameter:
Between 0.890 inches and 0.910 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The number of active coils provided.AXLK
Active Coil Quantity:
7.0
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
10.000 pounds per inch
Spring Free Outside Diameter:
Between 0.890 inches and 0.910 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Mtl-music wire per astm-a-228, finish-embrittlement relieve per qq-p-416, type ii, class 1
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
1.844
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel uns k08500
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-470 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Gss-8050. Grumman aerospace mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical