부품 정보
Smooth finish and free from cloth inprint, 0.016 in. H serrations located on top outer radius 90 degrees apart
TXT
묘사:
Nonmetallic Special Shaped Secti
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Unable To Decode:
Unable to decode and unable to decode
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
75.0 shore durometer a and 85.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1500 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 200.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.885 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
96.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Petroleum or low temperature and ozone resistant and weather resistant
Inside Radius:
0.325 inches
MRC:
A measurement taken at right angles to the length of a base flange,in distinction from thickness.AJGQ
Base Flange Width:
0.570 inches
MRC:
A measurement of a straight line drawn from the center of a circle to any part of its circumference.AJGW
Outside Radius:
0.385 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.CTGJ
Cross Sectional Shape:
C164
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Smooth finish and free from cloth inprint, 0.016 in. H serrations located on top outer radius 90 degrees apart, matt: rubber, synthetic, mil-r-6855, class 2, type a, grade 80
MRC:
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.ZZZW
Departure From Cited Document:
As modified by temperature
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
As differentiated by length
