MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Aluminum alloy
MRC:
Indicates the type of connection between the prime mover and the shaft.AAYX
Drive Connection Type:
Rigid coupled
MRC:
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.ABTD
Mounting Slot Width:
0.402 inches
MRC:
A measurement of the longest dimension of the mounting slot,in distinction from width.ABVG
Mounting Slot Length:
1.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Dustproof
MRC:
The distance between mounting facility centers.AEJN
Distance Between Mounting Facility Centers:
4.205 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Low tension
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Tongue
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
1 and 1
MRC:
The number of poles included in the item.AKPX
Pole Quantity:
2
MRC:
An indication of whether or not a distributor cap is included.ARFE
Distributor Cap:
Included
MRC:
The means of attaching the item.AXGY
Mounting Method:
Flange
MRC:
The number of impulses produced by one complete revolution.AXRT
Impulse Quantity Per Revolution:
2
MRC:
Indicates the type of ignition for which the item is designed.AXRW
Ignition Type For Which Designed:
Single
MRC:
Indicates the type of terminals included in the distributor cap to accommodate the spark plug wires.AYEN
Secondary Terminal Type:
Threaded
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter of the spark plug terminal accommodation.AYEP
Spark Plug Terminal Accommodation Thread Series:
Unef
MRC:
The name of the government agency or commercial organization controlling the mounting standard.AYFB
Mounting Standard Controlling Agency:
Sae
MRC:
The number assigned to the mounting standard by the controlling agency.AYFE
Mounting Standard Number:
J546
MRC:
The means by which the spark advance is controlled.AYKD
Spark Advance Control Method:
Centrifugal
MRC:
The maximum number of degrees the item is advanced.AYKF
Maximum Advance Deg:
Any acceptable
MRC:
Indicates the type of rotating element used with the item.AYKH
Rotation Element Type:
Permanent magnet rotor
MRC:
The revolutions per minute of the item at maximum advance.AYLF
Rpm At Maximum Advance:
Any acceptable
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Slot and threaded hole
MRC:
The means by which the spark is transferred from the rotor to the spark plug terminals.CPWB
Spark Distribution Method:
Contact
MRC:
The length of a straight line which passes through the center of a spark plug terminal accommodation which would bound the crest of an external thread or the root of an internal thread.CPWC
Spark Plug Terminal Accommodation Thread Diameter:
0.625 inches
MRC:
The number of screw threads on the spark plug terminal accommodation per linear inch,including incomplete threads,on a line parallel to the thread axis.CPWD
Spark Plug Terminal Accommodation Thready Qty Per Inch (tpi):
24
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CPWN
Mounting Facility Thread Series:
Unc
MRC:
The length of a straight line which passes through the center of a coaxial cylinder in plan view which would bound the crest of an external thread or the root of an internal thread.CPWR
Mounting Facility Thread Diameter:
0.375 inches
MRC:
The number of screw threads on the mounting facility per linear inch,including incomplete threads,on a line parallel to the thread axis.CPWS
Mounting Facility Thready Qty Per Inch (tpi):
16
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Any acceptable
