부품 정보
Grumman a10 aircraft
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
8.125 inches first end
MRC:
The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH
Minimum Inside Bending Radius:
4.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
3.000 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Round both ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Soft both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Ozone resistant and stowage device
MRC:
The length of a straight line which passes through the center of the end,and terminates at the inside circumference.CPYG
End Inside Diameter:
8.125 inches both ends
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
27.0 pounds per square inch
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
180.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass 3rd ply and plastic polyamide 3rd ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyamide 1st ply and rubber chloroprene class cr 1st ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyamide 2nd ply and rubber chloroprene class cr 2nd ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyamide 4th ply and rubber chloroprene class cr 4th ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel reinforcing wire
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Helically wound continous wire supported
