측정 단위:
* special requirements. EA
부품 정보
1 in. Inlet and outlet connections
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Brass
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the outside surface.AAJP
Outside Surface Treatment:
Chromium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Flush value (exposed type)
MRC:
The element, compound,or mixture of which the stem is fabricated,excluding any surface treatment.ABEP
Stem Material:
Any acceptable
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Water, fresh
MRC:
Indicates the location of the inlet on the item.ACQV
Inlet Location:
Right side
MRC:
The element,compound,or mixture of which the seating surfaces are fabricated.ACSH
Seat Material:
Any acceptable
MRC:
Indicates the designed use of the item.ACVE
Usage Design:
Exposed pipe
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Disk, flat, top and bottom guided
MRC:
The element,compound,or mixture of which the flow control device is fabricated.ADQV
Flow Control Device Material:
Any acceptable
MRC:
The means used to change the valve opening to control the flow of fluids or gases.ADQW
Valve Operation Method:
Handle
MRC:
The number of end connections included in the item.ADQZ
End Connection Quantity:
2
MRC:
The angle between the operating mechanism and the inlet,expressed in degrees.AFKJ
Operating Mechanism Angle From Inlet In Deg:
180.0
MRC:
Indicates the design feature of the item that controls the flow.AFLM
Flush Type:
Pressure
