TXT
묘사:
Extractor Post Fuseholder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Panel mounted type
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.190 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.280 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.060 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.152 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
MRC:
An overall measurement of the smallest dimension of a panel,in distinction from length or width.ADEE
Panel Thickness:
0.187 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Watertight
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting hole(s).AEVB
Mounting Hole Style:
Panel mounting w/2 or 3 holes
MRC:
The hue or tint of the lens.AEXD
Lens Color:
Amber
MRC:
The element,compound,or mixture of which the contact/s/ is fabricated,excluding any surface treatment.AFRG
Contact Material:
Any acceptable
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Submarine atmosphere control and compressed air/gas
MRC:
The number of fuses the item is designed to accommodate /including spares/.AGUE
Fuse Accommodation Quantity:
2
MRC:
A measurement of the longest dimension of a fuse the item can accommodate.AGUJ
Accommodated Fuse Length:
1.500 inches
MRC:
The length of a straight line which passes through the center of the accommodated ferrule,and terminates at the circumference.AGUK
Accommodated Ferrule Diameter:
0.406 inches
MRC:
The rated ohmic value of the resistor/s/ furnished with the item.AGUN
Resistor Rating:
33.000 ohms
MRC:
The minimum to maximum voltage at which the indicating lamp circuit is designed to operate,expressed in volts.AGUP
Indicating Lamp Voltage Range In Volts:
+90.0/+500.0
Length From Front Protrusion To Mounting Surface:
1.190 inches
MRC:
The length of a straight line which passes through the center of the cap,and terminates at the circumference.AGUV
Cap Diameter:
0.620 inches
Mounting Hole Height:
1.840 inches
MRC:
A measurement taken at right angles to the length of the mounting hole,in distinction from thickness.AGUX
Mounting Hole Width:
1.560 inches
Center To Center Distance Between Outside Mounting Holes Along Length:
1.940 inches
Center To Center Distance Between Outside Mounting Holes Along Width:
1.000 inches
MRC:
The length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread.AJYN
Screw Thread Diameter:
0.164 inches
MRC:
The number of screw threads on the item per linear inch measured on a line parallel to the thread axis,including incomplete threads.AJYQ
Screw Thready Qty Per Inch (tpi):
32.0
MRC:
The amount of electrical current the item is designed to carry,expressed in amperes.CQJL
Current Carrying Rating In Amps:
30.0
MRC:
Indicates the type of fuse terminations which the item will accommodate.CSNM
Fuse Terminal Type Accommodated:
Ferrule
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
33.0
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-prf-19207 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
4 threaded stud
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-prf-19207/23 government specification
