부품 번호:
fed-std-307typeiiclassc
부품 정보
Uvehicle gross weight 6000 lbs; van is item 21 under type ii, class c; 1500 lbs min payload; maximum wheelbase 138; 300 engine, gas; power brakes and steering; 15 in wheels; p225 radial tires; 30 gal fuel tank; hinged side door
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Any acceptable
MRC:
The number of cylinders incorporated in the item.AAXZ
Cylinder Quantity:
8
MRC:
The number of batteries required for operation.AEXR
Battery Quantity:
1
MRC:
The number of wheels included on the item.AGDH
Wheel Quantity:
4
MRC:
The number of drive wheels included on the item.AGDJ
Drive Wheel Quantity:
2
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Any acceptable
MRC:
The power actually delivered by the engine,at a specified speed,which is available for driving the item.ALKK
Engine Brake Horsepower:
Any acceptable
MRC:
The electric potential that a battery can provide,expressed in volts.ANLJ
Battery Voltage Rating In Volts:
12.0
MRC:
The number of windows provided.ATSY
Window Quantity:
Any acceptable
MRC:
The number of reverse speeds provided.ATWQ
Reverse Speed Quantity:
Any acceptable
MRC:
Indicates the type of transmission used to transfer developed mechanical energy to the drive unit.AXJD
Transmission Type:
Automatic
MRC:
The number of forward speeds in each range.AXJF
Forward Speed Quantity Per Range:
3
MRC:
The number of seating places provided.BTLY
Seating Capacity:
8
MRC:
The load capacity of the item as rated by the manufacturer.CNTJ
Rated Load Capacity:
1.50 tons
MRC:
Indicates the location of the drive axle on the item.CNTK
Drive Axle Location:
Rear
MRC:
Indicates the type of mechanism used to transmit power at the rear wheels.CNTL
Axle Drive Type:
Conventional
MRC:
The number of rear axle speeds.CNTM
Axle Speed Quantity:
1
MRC:
Indicates the type of rear wheel mounting provided.CNTQ
Rear Wheel Mounting Type:
Single
MRC:
The nominal distance between front and rear axles or between the front axle and center point of rear multi-axle assemblies/tandems,tridems,etc./.CNTR
Wheelbase:
125.00 inches
MRC:
The nominal tread distance between the centers of the front wheels.CNTS
Front Wheel Tread Width:
Any acceptable
MRC:
The nominal tread distance between the centers of the rear wheels.CNTT
Rear Wheel Tread Width:
Any acceptable
MRC:
The number of forward speed ranges provided.CNTX
Forward Speed Range Quantity:
1
MRC:
Indicates the type of adjunct transmission provided.CNTY
Transmission Adjunct Type:
Any acceptable
MRC:
The means by which the brakes are actuated.CNYW
Brake Actuation Method:
Hydraulic
MRC:
A nominal measurement of the longest dimension of the cargo area.CNZP
Cargo Area Length:
Any acceptable
MRC:
A nominal measurement of the cargo area taken at right angles to the length of the area.CNZQ
Cargo Area Width:
Any acceptable
MRC:
A nominal measurement from the bottom to the top of the cargo area.CNZR
Cargo Area Height:
Any acceptable
MRC:
Indicates the location of the cargo door/s/ on the item.CNZS
Cargo Door Location:
Any acceptable
MRC:
The maximum weight of a fully equipped vehicle and allowable payload of cargo or passengers.CPKD
Vehicle Maximum Gross Weight:
8510.00 pounds
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Base maintenance
