TXT
묘사:
Valve Spring Retainer Lock
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Not casehardened
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.372 inches and 0.382 inches
MRC:
An indication of whether a portion/s/ of the item is threaded or unthreaded.AFEW
Thread Provision:
Unthreaded
Largest Inside Diameter:
Between 0.339 inches and 0.343 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter:
Between 0.499 inches and 0.503 inches
First Groove Width:
Between 0.020 inches and 0.025 inches
Second Groove Width:
Between 0.020 inches and 0.025 inches
MRC:
The smallest length of a straight line which passes through the center of an item,and terminates on the inside circumference.BKKZ
Minimum Inside Diameter:
0.326 inches
Distance Between First And Second Groove Centers:
Between 0.085 inches and 0.090 inches
Distance From Bottom To First Groove Center:
Between 0.137 inches and 0.139 inches
Outside Included Angle In Deg:
14.25
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel sae j403 no. 1010
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel sae j403 no. 1010
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight bore w/two grooves-lower outside radius
