부품 번호:
envisionct711system
부품 정보
Computed tomography (ct) auto injector system ea
TXT
묘사:
Computed To Auto Injector System
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Includes operator console for remote control of system; portable pedestal stand, mountable if needed to hold auto injector, or be ceiling mountable in the current depmeds ct isoshelter; front loading capability and must accept either pre-filled or disposable syringes; contains at least 10 pre-stored protocols with multiple phases per protocol; have interphase delays in multiple increments and scan delays in multiple increments with an audible alarm; multiple pressure limits must exist from at least 25-300 psi; multiple flow rates; interface that works with current depmeds ct scanner; have syringe heater to maintain the pre-heated contrast at 37 deg; a copy of service data containing complete instructions for installation, operation and maintenance w/list of component parts; all components subject to title 21 cfr; 110/220 vac 60 hz ac power
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Storage: temp: 10 to 62.8 degrees c; 0 to 95% relative humidity, altitude: seal level to 3000 meters, operation: temp: 5 to 55 degrees c; humidity: 0 to 85% relative humidity; altitude: sea level to 3000 meters; training material shall be provided; must include extra set of software, if applicable
