TXT
묘사:
Line Actuating Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Steel
First End Outside Diameter:
3.500 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
165.0 degrees fahrenheit
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-10.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
7.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
7.500 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
6.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Weapons system nimitz class cvn
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
3000.0 pounds per square inch
MRC:
The means used to operate the integral valve.CKRM
Integral Valve Operation Method:
Hydraulic
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Single acting single cylinder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
External threaded
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Fork cylinder head end
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 cylinder head end
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 piston rod end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Gasket seal
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.CLMW
Port Thread Series Designator:
Un
MRC:
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.CLMX
Port Thread Diameter:
1.312 inches
MRC:
A measurement of the number of screw threads on the port per linear inch,including incomplete threads,on a line parallel to the thread axis.CLMY
Port Thready Qty Per Inch (tpi):
12
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal port thread.CLNB
Port Thread Class:
2b
