부품 정보
Item is self lubricated; has a dyflon plastic alloy liner; item is partof the link assembly, interconnect inboard elevator; used on elevator interconnect installation on cargo aircraft
TXT
묘사:
Rod End Plain Bearing
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Externally threaded
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.8745 inches and 0.8750 inches
Outer Member Outside Diameter:
Between 2.5520 inches and 2.5720 inches
Bore Center To Shank End Distance:
Between 4.4900 inches and 4.5100 inches
Outer Member Width:
Between 0.8700 inches and 0.8800 inches
Inner Member Width:
Between 1.1230 inches and 1.1250 inches
Shank End To Shoulder Length:
Between 2.4690 inches and 2.5620 inches
Shank Thread Length:
Between 2.4380 inches and 2.4690 inches
MRC:
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AWDP
Thread Diameter:
1.0000 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-b-8948 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shouldered ball type
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
