TXT
묘사:
Capacitor-resistor
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.688 inches and 1.750 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.ABKQ
Center To Center Distance Between Mounting Facilities Parallel To Length:
Between 1.109 inches and 1.141 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.422 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.188 inches and 1.250 inches
MRC:
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.ADTV
Case Material:
Copper, qq-c-576
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the case.ADTY
Case Surface Treatment:
Tin plated
MRC:
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.AEBZ
Schematic Diagram Designator:
1 capacitor, 3 resistors
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
2
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale of the mounting facility.ALBL
Mounting Facility Thread Size And Series/type Designator:
0.164-32 unc
MRC:
The form of assembly in which the item is supplied.ALPM
Assembly Form:
Encased
MRC:
The means of attaching the item.AXGY
Mounting Method:
Threaded stud
MRC:
Indicates the type and number of terminals for providing electrical connection.CCFF
Terminal Type And Quantity:
4 solder stud
MRC:
The relative level of the quantity of electrical charge at a given potential which the capacitor is capable of receiving and storing per function.CNQR
Capacitance Value Per Function:
10000.0 picofarads capacitor c1
MRC:
The limits of permissible deviation of capacitance value per function of an item from its rated value,expressed in percent.CNQS
Capacitance Tolerance Per Function In Percent:
-10.0/+10.0 capacitor c1
MRC:
The direct current voltage per function for which the item is rated,expressed in volts.CNQT
Dc Voltage Rating Per Function In Volts:
300.0 capacitor c1
MRC:
A measure of the opposition to the flow of electrical current per function.CNQX
Electrical Resistance Per Function:
1.0 megohms resistor r3
MRC:
A measure of the opposition to the flow of electrical current per function.CNQX
Electrical Resistance Per Function:
1.5 megohms resistor r1
MRC:
A measure of the opposition to the flow of electrical current per function.CNQX
Electrical Resistance Per Function:
1.5 megohms resistor r2
MRC:
The permissible variation in the electrical resistance value of an item from its rated value per function,expressed in percent.CNQY
Resistance Tolerance Per Function In Percent:
-2.2/+0.4 resistor r1
MRC:
The permissible variation in the electrical resistance value of an item from its rated value per function,expressed in percent.CNQY
Resistance Tolerance Per Function In Percent:
-2.2/+0.4 resistor r2
MRC:
The permissible variation in the electrical resistance value of an item from its rated value per function,expressed in percent.CNQY
Resistance Tolerance Per Function In Percent:
-2.3/+0.5 resistor r3
MRC:
The maximum amount of electrical energy that can be expended by a resistor per function,expressed in watts.CNQZ
Resistor Power Dissipation Rating Per Function In Watts:
2.000 all resistors
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
18876-8007245 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
