MRC:
Items furnished as accessories which are not specified elsewhere.ABFF
Furnished Items:
Connector and installation hardware
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.250 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.200 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.750 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.171 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
6
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
960.000 megahertz single antenna element and 1220.000 megahertz single antenna element
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Hermetic and weatherproof
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft
MRC:
A letter or group of letters used to designate the particular coaxial connector series.AHUC
Coaxial Connector Series Designation:
N single antenna element
MRC:
The design of the connector end.AHUD
Connector End Design:
Pin single antenna element
MRC:
The orientation of the electrical vector of energy radiated from the item relative to the line of propagation.AJCT
Electromagnetic Polarization Type:
Vertical single antenna element
MRC:
The graphical representation of the radiation pattern of the device as a function of direction.AJCU
Radiation Pattern:
Omnidirectional single antenna element
MRC:
The amount of electrical energy that can be dissipated.AJDB
Power Rating:
100.000 watts peak single antenna element
MRC:
The reactance-resistance complex value which must be matched by the transmission line and termination to achieve lowest standing wave ratio,expressed in ohms.AJDD
Characteristic Impedance In Ohms:
50.0 single antenna element
MRC:
The means used to direct a beam/s/ of energy successively over a given region.AJDH
Beam Scanning Method:
Fixed single antenna element
MRC:
Indicates the design type of the item.APGF
Design Type:
Blade single antenna element
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Fail-safe feature
MRC:
Indicates the type of terminal for providing electrical connection to the item.CSCF
Terminal Type:
Receptacle, coaxial single antenna element
MRC:
The ratio of the signal intensity of an item radiated in a specific direction to the signal intensity radiated in the same direction by a standard device,expressed in decibels.CTMN
Power Gain In Decibels:
0.00 single antenna element
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Low-profile l-band blade antenna; n male connector type; no.6 screws-stainless steel; color finish not known; aerodrag 2oz, sea level, mach 0.5; 4.5oz, seal level, mach 0.8; side load withstands 175 lbs; mil-t-5422e; arinc 532e (atc transponder) 521d (dme); faa tso-c74 (atc transponder) tso-c66a (dme)
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
See feat
