부품 번호 DKC8276

Bevel Gear

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards
부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
dkc8276
비무장화:
No
수명:
측정 단위:
NIIN:
003552547

부품 정보
3three 5/32 in. Diameter drilled holes equally spaced at an angle between teeth to back side of gear, relieved 1/32 in. Deep by 1/16 in. On both sides of corner where backside of web joins hub, 3/16 in. By 45 degrees chamfer od of hub of back side of gear

NSN
국가 주식 번호:
3020-00-355-2547 3020003552547
TXT
묘사:
Bevel Gear
INC
INC
아이템 이름 코드:
05463
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Webbed, solid
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
10 both ends
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
4.5000 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
18
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Straight spline both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
52.1 rockwell c and 59.2 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
4.607 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.865 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Straight
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
63.4333 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.318 inches second end
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.687 inches first end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.875 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain both ends
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
2.185 inches first end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
2.370 inches second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Side face, protruding hubs

{lang[cimilar]} Bevel Gears

« Gears, Pulleys, Sprockets and Transmission Chain {lang[catalog]}
  • 28189
    NSN: 3020-00-355-2561
  • 31440
    NSN: 3020-00-355-2579
  • 14099
    NSN: 3020-00-355-2621
  • 76254
    NSN: 3020-00-355-2667
  • 7063717
    NSN: 3020-00-355-2777
지금 비교»
맑다 | 숨기다