부품 정보
Bottle weighing glass 50 mm high 40 mm diameter 45 ml capacity
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
40.000 millimeters
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
50.000 millimeters
MRC:
Indicates the type of glass provided.ATFC
Glass Type:
Soda-lime
MRC:
The rated capacity of the item.ATYX
Capacity Rating:
45.0 milliliters
MRC:
Indicates the type of closure provided.AWCX
Closure Type:
Pennyhead ground stopper
MRC:
The numeric designation by which the standard taper size is identified.AWDG
Standard Taper Size Designation:
40/12
MRC:
The measured weight of the exterior container.ECWT
Exterior Container Weight:
49.00 pounds
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the exterior container and rendered in cubic units.EXME
Exterior Container Cubic Measure:
3.000 cubic feet
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material (non-core):
Glass
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Glass
MRC:
The physical configuration of the item.SHPE
Shape:
Cylindrical
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the unit of issue and rendered in cubic units.SUCB
Unit Of Issue Cube:
0.019 cubic feet
MRC:
The measured weight of the actual container(s) or supporting device(s) which is in direct contact with the item and its contents.SUWT
Unit Of Issue Weight:
0.17 pounds
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
2 type
MRC:
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.ZZZW
Departure From Cited Document:
As modified by standard taper size
