부품 정보
Diamond knurled on head, 0.620 inch wide.
TXT
묘사:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat fillister
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.300 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 1.1130 inches and 1.1230 inches
Under Head Length:
4.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.120 inches
Second Hole Diameter:
Between 0.198 inches and 0.204 inches
Distance From Centerline Of Hole To End Of Pin:
0.400 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.600 inches
Pin Chamfer Angle:
10.0 degrees
Pin Head Diameter:
1.250 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
1.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-290, cl2 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
