부품 정보
Two 0.946 in. Diameter lockwire hole drilled in head
TXT
묘사:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain
Concentric Hole Depth:
1.156 inches
Concentric Hole Diameter:
0.172 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.375 inches
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded external tube
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
Flared
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.688 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.437 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
First Diameter From Wrenching Feature:
0.435 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.750 inches
First Radial Fluid Hole Diameter:
0.188 inches
Distance From First Radial Hole Center To End Of Bolt:
0.781 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
1.188 inches
Wrenching Feature Height:
0.188 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
20
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The angle of the end surface upon which the mated surface seats.CQPR
First End Seat Angle:
45.0 degrees
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.437 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/3 federal specification single material response or qq-a-225/5 federal specification 2nd material response or qq-a-250/4 federal specification 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 2 military specification single treatment response
MRC:
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.ZZZX
Departure From Cited Designator:
This bolt is identical to an775-4 bolt with the exception of two drilled holes in head for lockwire
