부품 번호:
d6551-2207-f402f403
부품 정보
Anode spool piece assembly
MRC:
The industrial designation or term used to define the diameter of pipe.AAGN
Pipe Size Designation:
10.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 23.635 inches and 23.885 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
S7 plain neck
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Heat exchanger, misc, cvn
MRC:
A measurement of the smallest dimension of the end,in distinction from length or width.AXPW
End Thickness:
46.1 millimeters
MRC:
The length of a straight line which passes through the center of the end,and terminates at the outside circumference.BCCH
End Outside Diameter:
445.0 millimeters
MRC:
The length of a straight line which passes through the center of an end bolt circle,and terminates at the circumference.CGMC
End Bolt Circle Diameter:
200.0 millimeters
MRC:
The number of bolt holes provided on the end of the item.CGNL
End Bolt Hole Quantity:
12
MRC:
The length of a straight line which passes through the center of the end bolt hole,and terminates at the circumference.CGNM
End Bolt Hole Diameter:
0.875 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Carbon steel pipe with 70/30 cuni cladding/plating; flat face flange connections
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Copper alloy, mil-c-15726, comp 70-30
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 715
