부품 정보
Pneumatic forlift truck
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
47.100 inches
MRC:
A measurement of the longest dimension of a fork,in distinction from width.AGBS
Fork Length:
41.300 inches
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
4.900 inches
Overall Height With Forks In Lowest Position:
85.200 inches
Overall Height With Forks In Highest Position:
176.800 inches
Overall Length Without Forks:
102.200 inches
MRC:
The radius of a circle formed by the outermost part of a vehicle while executing the shortest possible turn.AGCQ
Vehicular Turn Radius:
93.100 inches
MRC:
A measurement of the distance from the front face of the forks to a specified point at which the rated load capacity is determined.AGCT
Fork Load Center Distance:
24.000 inches
MRC:
The maximum vertical height or distance the carrying surface of the forks,platform,and the like,can be raised from ground level without extending the uprights beyond the specified collapse mast height.AGDB
Fork/platform Maximum Free Lift Height:
6.000 inches
MRC:
Indicates the type of lift mechanism included on the item.AGDC
Lift Mechanism Type:
Hydraulic
MRC:
The means by which the lift is actuated.AGDD
Lift Actuation Method:
Powered
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Diesel engine
MRC:
Indicates the type of transmission used to transfer developed mechanical energy to the drive unit.AXJD
Transmission Type:
Automatic
MRC:
The maximum rated load the item is designed to accommodate.AYXK
Maximum Load Rating:
6000.000 pounds
MRC:
An overall measurement of the distance between the ground surface and the bottom of an item.CHLD
Overall Underclearance:
4.100 inches
MRC:
Indicates the type and number of wheels included on the item.CRRF
Wheel Type And Quantity:
4 single pneumatic all wheels
Lift Height Of Forks:
127.200 inches
Boom Forward Tilt Angle:
6.0 degrees
Boom Backward Tilt Angle:
10.0 degrees
MRC:
The outside to outside distance between forks.CWAH
Fork Spread Distance:
Between 11.300 inches and 41.100 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Travel speed 11.2 mph loaded, 12.1 mph unloaded; height of overhead guard 85.9 in; has a 3.3 liter diesel engine
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Conventional
