부품 정보
Thd mtg holes located to left of keyway, unthd holes located toright of keyway
MRC:
The means used to attach the item.ABSX
Attachment Method:
Mounting hole
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
58.4750 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
174
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for the specific diameter of a threaded mounting hole.CMLK
Mounting Hole Thread Series Designator:
Unc axially through body, first end
MRC:
The number of mounting hole threads per linear inch measured on a line parallel to the thread axis.CMLM
Mounting Hole Thready Qty Per Inch (tpi):
18 axially through body, first end
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
5.000 inches
MRC:
A nominal measurement taken at right angles to the length of a keyway,in distinction from thickness.CWSN
Keyway Width:
2.000 inches first end
MRC:
The nominal length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.CWZK
Mounting Hole Diameter:
0.687 inches axially through hub, first end
MRC:
The nominal length of a straight line which passes through the center of a bolt hole circle,and terminates at the circumference.CWZN
Bolt Hole Circle Diameter:
18.250 inches axially through hub, first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Recessed hubs
